• 1.Steatite 2.7g/cm3 2.K7-H为3.1g/cm3；3.K9-H为3.7g/cm3；
  1. Steatite: 2.7g/cm3
  2. K7-H: 3.1g/cm3
  3. K9-H: 3.7g/cm3

• Stable,corrosion resistance

• Above 250 centi degree, if temperature rise gradually, K9-H could stand 1500 centi degree.

• If wall thickness is 1mm, it can stand instantaneous pulse voltage larger than 5000V. 

• For K9-H & K7-H, the samples lead time is 20 days against the drawing confirmation.
  For steatite, it is 18 days.

• Based on the structure and size.
  1. If  0mm-20mm, the overall wall thickness can't be less than 1.5mm, for the transition part, it can't be less than 1.2mm.
  2. If 20mm-40mm, the overall wall thickness can't be less than 2.0mm,for the transition part, it can't be less than 1.5mm. 
  3. If 40mm-60mm, the overall wall thickness can't be less than 2.5mm,for the transition part, it can't be less than 1.8mm.
  4.If 60mm-80mm, the overall wall thickness can't be less than 3.0mm,for the transition part, it can't be less than 2.2mm.
  5. For the above, the overall wall thickness can't be above 5mm, for the specific area, it would be set based on the detailed structure.

• C37、G45、P45、G50、A55、A60、GU10、MR16、G9、G4、E14 housing;
   ceramic used in luminaire; ceramic PCB; ceramic PCB used for LED.

• 1. Kangrong owns the most professional R&D team, we can provide professional guidance in the R&D stage, make risk envaluation, shorten the R&D lead time.
  2. Kangrong can provide the overall solution, focus on the heat dissipation simulation, mechanical design.
  3.High quality assurance system.
  4.Scaled production.
  5.Better service and after sales service.
  6.Sound social responsibility.

• Compared with Al, ceramic is safe, insulating, high voltage resisting,good heat dissipation.
  Ceramic could solve those fixture can't pass high voltage test. And for those LED lamp or fixture with the driver inside, the driver could be made in the non-isolated way, and reduce the overall cost for fixture or lamp.

• 0.95

• SiO2, MgO ,Al2O3 and additive for heat dissipation.

• 10W/m.K